Fein Slugger HoleMaker III Instruction Manual page 11

Technical description and specifications.
Before mounting or replacing cutting tool or accessories, pull the power plug.
WARNING
This preventive safety measure rules out the danger of injuries through acci-
dental starting of the power tool.
Not all accessories described or shown in this instruction manual will be included with your-
power tool.
Drill-motor cable
Tool holder
Application tool
Chip guard
JME USA 202 M
GFCI (*) personal
protection switch
Coolant container
Switches the magnet On/Off
Magnetic foot
Starts the drill motor
Rotation direction: clockwise
Stops the drill motor
en
11
Fig. 1
Spoke handle