Fein Slugger HoleMaker III Instruction Manual page 22

en
22
Activating and deactivating the cool-
ant-lubricant flow (figure 12).
To activate the cooling-lubricant
flow, open the ventilation first and
then turn the flow valve to the posi-
tion shown.
For switching off or when working
overhead, deactivate the cooling-
lubricant flow. Shut the ventilation
and turn the flow valve to the posi-
tion shown.
When working overhead, use a cooling-
lubricant paste from Slugger.
Fig. 12
1.
Ventilation
2.