Table of Contents
Advertisement
2. INSTALLATION
2. INSTALLATION
CAUTION
2.1 Environmental conditions
Ambient
temperature
Ambient humidity
Ambient
Altitude
Vibration
Downloaded from
ManualsNet.com
Stacking in excess of the limited number of products is not allowed.
Install the equipment to incombustibles. Installing them directly or close to
combustibles will led to a fire.
Install the equipment in a load-bearing place in accordance with this Instruction
Manual.
Do not get on or put heavy load on the equipment to prevent injury.
Use the equipment within the specified environmental condition range.
Provide an adequate protection to prevent screws, metallic detritus and other
conductive matter or oil and other combustible matter from entering the Converter
unit and servo amplifier.
Do not block the intake/exhaust ports of the Converter unit and servo amplifier.
Otherwise, a fault may occur.
Do not subject the Converter unit and servo amplifier to drop impact or shock loads
as they are precision equipment.
Do not install or operate a faulty Converter unit and servo amplifier.
When the product has been stored for an extended period of time, consult
Mitsubishi.
Environment
[ ]
Operation
[ ]
[ ]
Storage
[ ]
Operation
Storage
search engine
0 to 55 (non-freezing)
32 to 131 (non-freezing)
20 to 65 (non-freezing)
4 to 149 (non-freezing)
90%RH or less (non-condensing)
Indoors (no direct sunlight)
Free from corrosive gas, flammable gas, oil mist, dust and dirt
Max. 1000m (3280 ft) above sea level
2
5.9 [m/s
] or less
2
19.4 [ft/s
] or less
2 - 1
Conditions
Advertisement
Table of Contents
