Olympus DP74 Instructions Manual page 30

b
3
Restricted
Restricted
The direction of the PCIe interface board may
become upside down depending on the PC in use.
26
3
e
NOTE
c
4
d
4
NOTE
5
Insert the PCIe interface board b into the PCIe slot c carefully
without touching the board surface directly by hand.
Do not install the following boards in the adjacent slot on
the fan side of the PCIe interface board. Otherwise, it may
deteriorate product performance.
· Graphic board
· PCIe interface board of DP80, DP73 or DP72
· Board with power consumption of 3W or more
Connect the connector d to the SATA power cable e of PC.
· Insert the cable connectors completely to the end.
· For prevention from possible damage, be careful not
to apply excessive force to the connectors of the PCIe
interface board or cables.
Fix the cover of the PCIe slot securely and attach the cover of the
desktop PC to the original position. Make sure that the cables are not
caught in the cover or the operation portions inside PC such as fan, etc.
For procedures to remove the cover of the desktop PC and the
cover of the PCIe slot, refer to the instruction manual of the PC.
DP74