Waeco AirCon Service 6300G Operating Manual page 35

14.8 Replacing the printer paper
1. To replace the printer paper roll open the cover (K).
2. Insert the new paper roll and close the cover (K).
14.9 Meter readings
The A/C service unit saves various meter readings. To access the total values (consecutively, since the A/C ser-
vice unit was produced) proceed as follows:
1. Enter the Other selections – Service menu.
2. Enter the code
7783
3.
Use the cursor keys
4. To access the meter readings which can be reset, enter the code
the vacuum pump oil
R1234 from system
Total
g.
STOP-EXIT
R1234yf from system indicates how many grams of refrigerant have been extracted from air conditioning
systems using the menu item Short selection or Free selection since the last reset (see date).
R1234 from tank
Total
g.
STOP-EXIT
R1234yf from tank indicates how many grams of refrigerant were added to the A/C service unit using the
menu item Int. vessel filling since the last reset (see date).
R1234 to system
Total
g.
STOP-EXIT
R1234yf to system indicates how many grams of refrigerant have been added to the air conditioning sys-
tems using the menu item Short selection or Free selection since the last reset (see date).
Vacuum time
Total
min.
STOP-EXIT
Vacuum time indicates how long the vacuum pump has operated since the last reset (see date).
.
or to select the required entry. These meter readings cannot be reset.
on page 31 or Changing the dryer filter
07/03/17
1455
07/03/17
3395
07/03/17
1200
07/03/17
under Service (see also
7782
on page 29).
79
English
Changing
33