Waeco AirCon Service 6300G Operating Manual page 23

5. Enter the password and press ENTER to confirm.
• : Monthly report
4910
• : Annual report
4918
If a USB flash drive has not been inserted or is not recognised, the Error 52 message appears.
6.
Use the cursor keys
7. Follow the instructions on the display.
8. Switch back to the previous selection using STOP.
13.6 Displaying refrigerant consumption
The A/C service unit saves the data on the amount of refrigerant filled and extracted. You can print out this data
as an annual or monthly overview.
1.
In the basic menu use the cursor keys
Short selection
Free selection
Other selections
ENTER-OK
2. Press ENTER to confirm.
3.
Use the cursor key
Flushing
Reset scales.
Service.
ENTER-OK STOP-EXIT
4. Enter the password
9051
Service.
5.
Use the cursor keys
2017
Example
R1234yf from system
Total
g.
PRINT STOP-EXIT
R1234yf from system shows the quantity of refrigerant extracted. Here a total of 18650 g of refrigerant
was extracted by the A/C service unit in 2017.
Use the cursor key
R1234yf to system
Total
g.
PRINT STOP-EXIT
Press the cursor key
or to select the required entry and press ENTER to confirm.
or to select Other selections.
to select Service and press ENTER to confirm.
and press ENTER to confirm.
----
to select the year and press ENTER to confirm:
or
2017
18650
to move to the next total amount of filling refrigerant for that year:
2017
9000
to display the monthly overview:
English
21