Waeco AirCon Service 6300G Operating Manual page 22

English
9. Enter the refrigerant quantity and press ENTER to confirm.
AUDI
A4 (8E)
2000 - 2004
The entry has been created.
AUDI
A4 (8E)
10. Proceed as follows:
• Create another entry by using the cursor keys to select Database and proceed as described.
• To exit the menu press STOP.
13.5 Transferring the consumption of the refrigerant onto a USB flash drive
Each time a suction or filling process (single process or fully automatic) is completed, the A/C service unit stores
all the data in the internal memory. A report of this data can be generated and transferred to a USB flsh drive.
Note The USB flash drive must be formatted with the FAT32 file system.
Each report is saved in two formats:
• As an HTML file (to be opened with any internet browser)
• As an XLS file (to be opened with Microsoft Excel)
The report may contain a logo (e.g. the workshop logo) if a graphic is copied to the USB flash drive that meets the
following requirements:
• File format: JPEG format
• File name: logo.jpg (each letter in lower case)
• Screen size: 370 x 50 pixels
The company address in the report is taken from the A/C service unit
13.5.1 Annual reports
After the calendar year has changed, the A/C service unit indicates that the data stored from the previous
calendar year should be transferred to a USB flash drive. After transferring the annual data to a USB flash drive, it
is deleted from the A/C service unit's internal memory.
1. Insert the USB flash drive in the USB port.
2. Follow the instructions on the display.
13.5.2 Manual reports
You can at any time manually transfer a monthly or annual report to a USB flash drive.
1. Insert the USB flash drive in the USB port.
2.
In the basic menu use the cursor keys
Short selection
Free selection
Other selections
ENTER-OK
3. Press ENTER to confirm.
4.
Use the cursor key
20
g. 500
0
1
or to select Other selections.
to select Service and press ENTER to confirm:
0
(Entering the company data on page 11).