Waeco AirCon Service 6300G Operating Manual page 15

Parameter
Display logo?
1.
In the basic menu use the cursor keys
Short selection
Free selection
Other selections
ENTER-OK
2. Press ENTER to confirm.
3.
Use the cursor key
4. Press ENTER to confirm.
5. Enter the password
7388
6. Use the keypad and the cursor keys to enter the information.
7. Press ENTER to confirm.
Press STOP.
8.
The standby menu is displayed.
12.10 Inserting the containers for oil and UV additive
NOTICE! Damage hazard Only use oils approved for the corresponding refrigerant. Observe the manu-
facturer's instructions.
The current supply quantities are displayed in the standby menu.
1. Open the cover flap (20) on the left side and push the containers into the snap locks:
• Container for fresh oil (17)
• Container for UV additive (18)
or to select Other selections.
to select Service.
.
Default value
Yes
English
13