Page 1
10” Square (Hotplate) Magnetic Stirrer HSCD-10 User Manual LCD Digital 10"Square Hotplate Magnetic Stirrer Please read the User Manual carefully before use, and follow all operating and safety instructions! Technical specifications and outline are subject to change without prior notice.
Preface Warranty Welcome to the “ 10” Square Hotplate Magnetic Stirrer”. This instrument is warranted to be free from defects in Users should read this Manual carefully, follow the materials and workmanship under normal use and service, for instructions and procedures, and aware of all a period of 24 months from the date of invoice.
instrument in explosive atmosphere, with hazardous 1. Safety Instructions substances or under water. • Gradually increase the speed, reduce the speed if: Warning! - Stirring bar breaks away due to high speed • Read operating instructions - The instrument is not running smoothly, or container carefully before use.
• The instrument can only be disconnected from the main power supply by pulling out the main or the connector plug. • The voltage stated on the label must correspond to the >100mm main power supply. • Ensure that the main power supply cable does not touch the hotplate.
3.2 Listing of Items 3. Inspection The package includes the following items: 3.1 Receiving Inspection Items Main unit Unpack the equipment carefully and check for any damages User Manual which may have arisen during transport. Please contact supplier for technical support. Note: Table 1 If there is any apparent damage to the system,...
4. Control 4.1 Control elements Items Descriptions Temperature The heating function is switched control knob LCD Display Speed Control Set the rated rotary speed. The Knob stirring function is switched ON or LED Heat OFF by SD card LED Stir LED Heat When the heating function is switched ON, the LED Heat is lit...
4.2 Display function Probe Display when using external probe Real value Display when using SD card Temperature Stir Timer Display values in when heating or Rated Timer stirring or timer function is Temp Stir value/Real ℃ switched ON. value Error Rated value Note: Probe...
5. Trial run 6. Working with external temperature sensor • Make sure the required operating voltage and power supply voltage match. • Ensure the socket properly grounded. • Plug in the power cable,ensure the power is on and begin initializing. •...
8. Logging function If the heating function does not work, please contact dealer/supplier for support. 7. Residual heat warning(HOT) In order to prevent the risk of burns from the hotplate, the unit has a residual heat warning function. When the heating function is switched off and the heating plate temperature is still above 50°C, “Hot”...
10. Maintenance and Cleaning The logged data can be checked in Excel format by connecting the SD card to a personal computer. • Proper maintenance can keep instruments working Note: properly and lengthen its lifetime. The logging function starts automatically when you •...
packing. party responsible for compliance could void the user's authority to operate the equipment. • The enamel makes the hotplate easier to care for and NOTE: This equipment has been tested and found to comply more resistant to acids and bases. Because of it, however, with the limits for a Class A digital device, pursuant to Part 15 the hotplate is also more susceptible to extreme of the FCC Rules.
12. Specifications Work plate Dimension [W x D] 254x254mm(10inch) Work plate material Glass ceramic Motor type Brushless DC motor Stirring positions Max. stirring quantity, [H2O] Max. magnetic bar[length] 80mm Speed range 100-1500rpm resolution±1rpm Speed,time, Temperature display Timer function 1min-99h59min Heating temperature range Room Temp.-500℃, increment1℃...
Page 14
Dimension [WxDxH] 328x424x138mm Weight 7.18kg Permissible ambient temperature and 5-40℃,80%RH humidity PLEASE READ THIS MANUAL CAREFULLY BEFORE OPERATION 3, Hagavish st. Israel 58817 Tel: 972 3 5595252, Fax: 972 3 5594529 mrc@mrclab.com MRC.1.22...
Need help?
Do you have a question about the HSCD-10 and is the answer not in the manual?
Questions and answers