Specific Warnings - Promeba PB-410 Series User Manual

USER GUIDE // STRETCHER SUPPORT SERIES PB-410
Review 2022/01
01
INTRODUCTION

01.10 Specific warnings

1. Establish a maintenance program and periodic testing, identifying a reference employee. The person to
whom the ordinary maintenance of the device is entrusted must ensure the basic requirements foreseen by
the manufacturer in the user's manual.
2. Always wear gloves during maintenance procedures.
3. Use only accessories/spare parts that are original or approved by Promeba, S.L. when carrying out any
operation, to avoid causing any alteration or modification to the device, otherwise we assume no responsi-
bility for the proper functioning or damage resulting from device to the patient or the operator and warran-
ty will be considered void.
4. Always respect the maximum capacity of the device, as indicated in this user's manual. Maximum load
capacity means the total weight distributed according to the human anatomy. In determining the load of
the total weight on the product, the operator must consider the weight of the patient, the equipment and
the accessories. Moreover, the operator must consider that the overall dimensions of the patient do not
reduce the functionality of the device.
5. The stretcher support must be installed in accordance with the specifications provided by the manufac-
turer and ensuring its compatibility with technical specifications of the stretcher.
6. Check that the configuration and the installation of the stretcher support are suitable for the stretcher
that is being used to ensure the proper use of the stretcher.
7. Promeba S.L. will not be responsible if an unauthorized stretcher anchor is used. This must comply with
the requirements of the EN 1789 standard, making it able to withstand accelerations of 10 g in all directions.
8. Do not use bleach to disinfect the product, neither use water jets or pressurized air. Use a hydroalcoholic
based disinfectant and wash with water.
9. The device and all its components, after washing, should be allowed to dry completely before storing. Do
not use drying machines.
10. Do not lubricate any part other than the one described in this manual. LLubrication must be carried out
after cleaning and complete drying.
11. Avoid contact with sharp objects.
12. Do not use the device if it has some kind of damage or poor cleaning condition.
13. Do not disassemble parts or components of the device, except those that are expressly indicated in this
manual.
14. Do not apply devices that may interfere with the operation of the stretcher support or that may hinder
your movements.
15. For the use of the device, one operator in suitable physical conditions is needed, with strength, balance,
coordination, and common sense and must be trained on the correct functioning of the device Promeba,
S.L. stretcher.
16. When the stretcher is loaded or unloaded from the stretcher support, the operator may have to hold
heavy loads. For this reason, it is necessary to verify that both devices have been correctly adjusted to en-
sure that all operations are carried out safely. In case of heavy loads, the presence of at least 2 operators is
required.
9