Table of Contents
Advertisement
London
Kit Components
3. Mount the coolant valve near the left-rear
wheel.
4. In front of the left-rear wheel, between the
inner and outer body panels, drill two 1 3/4
inch (45 millimeters) holes, five inches (127
millimeters) apart. Remove the material
between the holes and protect the cut edge
against corrosion and wire chafing.
5. Drill two 1 3/4 inch (45 millimeters) holes in
front of the left-rear wheel, similar to
previously done. Install edge protection
around the cut hole and protect against
corrosion.
10
Ford Transit
Advertisement
Table of Contents
Need help?
Do you have a question about the Transit London and is the answer not in the manual?