Related Manuals for Nauticam NA - R5C
Summary of Contents for Nauticam NA - R5C
-
Page 1: Table Of Contents
JUNE, 2022 NA - R5C For Canon EOS R5C Camera PN 17337 User Manual Housing FF- MIL Introduction Package Contents Important Instructions Part Names and Functions Housing Mount Opening the housing Closing the housing Preparation for Use Optional Accessories Care/Storage... -
Page 2: Introduction
PACKAGE CONTENTS Make sure that you have all the included items listed below before using this product. If some items are missing or damaged, contact your local Nauticam dealer. NA-R5C Padded Travel Case... -
Page 3: Important Instructions
O-ring renewal between the atmosphere and inside the and port change. housing. Only the accesories speci ed by Use only Nauticam lubricant on silicone Nauticam must be used. Third-party rubber O-ring. accessories may result in malfunctions or damage to the product. -
Page 4: Part Names And Functions
PART NAMES AND FUNCTIONS Rear View TTL Indicator Window Menu button White balance button / Rate button LCD / VF lever Housing unlock button 0.66x view nder Auto Iris button / AE lock button AF-L button / AF point selection button Multi selector Display button / Info button... - Page 5 PART NAMES AND FUNCTIONS Top + Front Views Power switch M24 Accessory port Adaptor Fn dial M10 thread hole Optical cable connector M14 Accessory port 8 button Mode button Lock button TTL ash on/off M16 Accessory port Quick control dial 2 Port lock safety button 15x 1/4-20 UNC holes Accessory mounting ball...
- Page 6 PART NAMES AND FUNCTIONS Back + Side Views 1/4” Threaded tripod holes Sacri cial zinc anodes Magnify / reduce lever Media lever / Playback lever Zoom/Focus knob Zoom/Focus knob FUNC lever / M-Fn lever Shutter release lever REC lever / 10 lever Main dial AF-ON lever...
-
Page 7: Housing Mount
HOUSING MOUNT Housing mount Compatible accessories 25625 M16 Vacuum valve II (pushbutton release) M16 Accessory port M14 Accessory port 25020 M14 Nikonos 5-pin bulkhead with Canon hotshoe connection M10 Accessory port 25221 M10 Strobe mounting ball 25224 M10 Strobe mounting ball with hole 16701 Top Handle 15x 1/4-20 UNC holes... -
Page 8: Opening The Housing
OPENING THE HOUSING * drawings as illustrations only depress housing unlock button turn housing lock outward lift up the back housing... -
Page 9: Closing The Housing
CLOSING THE HOUSING * drawings as illustrations only before closing the housing, clean and lubricate the main O-ring make sure nothing is caught between front and back housing and that they are fully aligned before locking turn housing lock inward until you hear and feel it click into place housing locked in place securely... -
Page 10: Preparation For Use
PREPARATION FOR USE * drawings as illustrations only Installing the Camera - housing tray attachment unlock camera tray lever and remove the tray from the housing attach the camera tray by tightening the tray screw into the tripod socket of the camera *lift up the power switch and adaptor Fn dial each time befroe installing the camera... - Page 11 PREPARATION FOR USE * drawings as illustrations only Installing the battery connect the camera and a battery with a cable after plug USB-C male to female elbow adaptor provided slide the camera tray back into the housing along the tray rail and bat- tery back into a battery holder under the camera as shown.
- Page 12 PREPARATION FOR USE * drawings as illustrations only Installing the Camera - RF mount/ EF mount lens installment RF mount lens make sure the small lever is in vertical position before RF mount lens installment EF mount lens make sure the small lever is in horizontal position before EF mount lens installment with Canon EF to EOS R mount adaptor...
- Page 13 PREPARATION FOR USE * drawings as illustrations only Port Mounting depress safety button and rotate anti-clockwise lubricant the port O-ring before mounting align index mark push port assembly straight in rotate locking lever clockwise to lock...
- Page 14 PREPARATION FOR USE * drawings as illustrations only Coating housing O-ring Main O-ring remove the main O-ring using an O-ring remover clean the O-ring groove with a cloth and ensure that it is free from salt or other foreign materials lightly coat it with provided lubricant return the main O-ring by slowly pressing from one corner to the whole perimeter...
- Page 15 PREPARATION FOR USE * drawings as illustrations only Setting up moisture alarm Alarm ON/OFF CR2032 Battery remove battery press the battery down until it insulation lm click into place switch on the alarm test the alarm - the moisture alarm - connect the wires with a window will ash in...
- Page 16 PREPARATION FOR USE * drawings as illustrations only Changing lens/port without opening the housing If using with vacuum valve : remove the cap from the vacuum valve and press the red button to release pressure before unlocking port lock If using without vacuum valve, please follow from step 2 unlock port lock and remove port assembly...
-
Page 17: Optional Accessories
OPTIONAL ACCESSORIES * drawings as illustrations only Vacuum valve system remove the plug of M16 accessory port from the housing remove the cap from the vacuum hand pump valve vacuum valve slightly lubricate the o-ring and make sure the o-ring is in place accesory port on housing then tighten the vacuum valve to... - Page 18 OPTIONAL ACCESSORIES * drawings as illustrations only Strobe Mounting Ball Installing M5 Strobe Mounting Ball - RECOMMENDED M5 screw remove M5 screw with the allen key provided in the screw #25228 M5 Strobe mounting ball directing onto housing package the M5 thread * the anti-corrosion screw may also be Anti-corrosion unscrewed while removing M5 screw, if this...
- Page 19 OPTIONAL ACCESSORIES Installing View nder rstly remove the pre-installed 0.66x view nder gently push the 0.66x view nder from the inside of from the housing by removing the retainer o-ring the housing inside rear housing remove the retainer o-ring from the view nder align the view nder alignment pins with the LCD lightly lubricate the retainer o-ring and place it back display window and push the view nder into the...
-
Page 20: Care/Storage
CARE/STORAGE Soak the housing system in fresh water Operate all controls and buttons at after salt water usage least 3 times while immersed in fresh water We recommand cleaning and inspecting Protect the housing with robust and the main O-ring each time after diving for shock-proof travel case during trans- any damage and every time the housing portation. -
Page 21: Warranty
NAUTICAM accepts no liability for any damage to and defects in the housing caused by improper use and/or poor maintenance; it is the responsibility of the own- er to carefully follow the instructions in our manuals. -
Page 22: Speci Cations
Monitor options ( 2.0 ) Monitor options ( 1.4 ) 17922 Nauticam Atomos Ninja V Housing for Atomos Ninja V 5” 17923 NA-Shinobi-H Housing for Atomos Shinobi 5.2” 4K HDMI Monitor 17922S Nauticam Atomos Ninja V-S Housing for Atomos Ninja V 5”... - Page 23 (incl. focusing unit #3, 150mm relay lens & 3 objective lenses) 85201 0.36x Wide Angle Conversion Port Wideangle *please refer to Nauticam port charts for more setup information. with Aluminium Float Collar (incl. N120 to N100 port adaptor) 85202 0.36x Wide Angle Conversion Port Set with Aluminium Float Collar for Sigma 18-35mm F1.8...
- Page 24 VIEWFINDER 32212 Nauticam Full Frame Straight View nder 40°/ 0.8:1 32214 Nauticam Full Frame Angle Viewinder 40°/ 0.8:1 32201 Nauticam 180 straight view nder 32203 Nauticam 45 view nder EXTERNAL BATTERY Compatible External Batteries Anker PowerCore III 19,200mAh Dimensions : 169x79x22.4mm Huge Cell Capacity 45W Power Weight : 425g.
- Page 25 Nauticam Internationl Ltd. Rm 2203, CCT Telecom Bldg, 11 Wo Shing St, Fo Tan, Hong Kong Tel. +852 - 26902711 Fax. +852 - 26909778 URL. www.nauticam.com Gallery. www.nauticam.smugmug.com...
Need help?
Do you have a question about the NA - R5C and is the answer not in the manual?
Questions and answers