Subscribe to Our Youtube Channel
Related Manuals for Nauticam NA-R6II
Summary of Contents for Nauticam NA-R6II
-
Page 1: Table Of Contents
January, 2023 NA - R6II For Canon R6II Camera PN 17339 User Manual Housing FF- MIL Introduction Package Contents Important Instructions Part Names and Functions Housing Mount Opening the housing Closing the housing Preparation for Use Optional Accessories Care/Storage Warranty Specifications... -
Page 2: Introduction
PACKAGE CONTENTS Make sure that you have all the included items listed below before using this product. If some items are missing or damaged, contact your local Nauticam dealer. NA-R6II Padded Travel Case... -
Page 3: Important Instructions
O-ring renewal between the atmosphere and inside the and port change. housing. Only the accesories specified by Use only Nauticam lubricant on silicone Nauticam must be used. Third-party rubber O-ring. accessories may result in malfunctions or damage to the product. -
Page 4: Part Names And Functions
PART NAMES AND FUNCTIONS Rear View TTL Indicator window Viewfinder Menu button Rate button TTL on/off button Multi selector -Up AE lock button Multi selector -Right AF point selection Magnify/reduce button Quick control button Info button Quick control dial 1 Set button Delete button Multi selector -Left... - Page 5 PART NAMES AND FUNCTIONS Top + Front Views M24 Accessory port M14 Accessory port 1/4” Threaded holes Still photo shooting/movie recording switch Optical fiber cable connection Mode dial M10 Accessory port Main switch Rear dial M16 Accessory port Accessory mounting ball Preview button Port index mark Lens release button...
- Page 6 PART NAMES AND FUNCTIONS Back + Side Views 1/4” Threaded tripod holes M5 Threaded holes Sacrificial zinc anodes Playback lever Zoom/Focus knob Port lock safety button Port locking lever AF-ON lever M-Fn lever Shutter release lever Housing unlock button REC lever Front dial...
-
Page 7: Housing Mount
M24-M16 Step Down Adaptor 25086 M24 adaptor for HDMI 2.0 cable 25077 HDMI 2.0 cable M5 Threaded holes 25218 Mounting ball set for tripod legs 1/4” -20 mounting threads 17954 Universal tripod plate 17960 Universal Quadra-Pod Plate for Nauticam Housings... -
Page 8: Opening The Housing
OPENING THE HOUSING * drawings as illustrations only depress housing unlock button turn housing lock latch anti-clockwise to open the housing flip open the back housing when lock latch is aligned to ‘open’ position... -
Page 9: Closing The Housing
CLOSING THE HOUSING * drawings as illustrations only before closing the housing, clean and lubricate the main O-ring make sure nothing is caught between front and back housing and that they are fully aligned before locking main O-ring insert the housing shaft into the shaft hole and then rotate the lock latch clockwise until you hear and feel it click into place... -
Page 10: Preparation For Use
PREPARATION FOR USE * drawings as illustrations only Installing the Camera - housing tray attachment unlock camera tray lever and remove the tray from the housing attach the camera tray by tightening the tray screw into the tripod socket of the camera place the actuator on the camera tray in place and make sure it is en- gaged with the focus mode swtich... - Page 11 PREPARATION FOR USE * drawings as illustrations only Port Mounting depress port lock safety button and rotate anti-clockwise lubricant the port O-ring before mounting align index mark push port assembly straight in rotate locking lever clockwise to lock...
- Page 12 PREPARATION FOR USE * drawings as illustrations only Coating housing O-ring Main O-ring remove the main O-ring using an O-ring remover clean the O-ring groove with a cloth and ensure that it is free from salt or other foreign materials lightly coat it with provided lubricant return the main O-ring by slowly pressing from one corner to the whole perimeter...
- Page 13 PREPARATION FOR USE * drawings as illustrations only Setting up moisture alarm CR2032 Battery Alarm ON/OFF remove battery press the battery down until it insulation film click into place switch on the alarm test the alarm - the moisture alarm - connect the wires with a window will flash in dampened cotton bud;...
- Page 14 PREPARATION FOR USE * drawings as illustrations only Changing lens/port without opening the housing If using with vacuum valve : remove the cap from the vacuum valve and press the red button to release pressure before unlocking port lock If using without vacuum valve, please follow from step 2 unlock port lock and remove port assembly...
-
Page 15: Optional Accessories
OPTIONAL ACCESSORIES * drawings as illustrations only Vacuum valve system remove the plug of M16 accessory port from the housing remove the cap from the vacuum valve hand pump slightly lubricate the o-ring and vacuum valve make sure the o-ring is in place accesory port on housing then tighten the vacuum valve to... - Page 16 OPTIONAL ACCESSORIES Installing Viewfinder firstly remove the pre-installed 0.66x viewfinder gently push the 0.66x viewfinder from the inside of from the housing by removing the retainer o-ring the housing inside rear housing remove the retainer o-ring from the viewfinder align the viewfinder alignment pins with the LCD lightly lubricate the retainer o-ring and place it back display window and push the viewfinder into the from inside the housing...
-
Page 17: Care/Storage
CARE/STORAGE Soak the housing system in fresh water Operate all controls and buttons at after salt water usage least 3 times while immersed in fresh water We recommand cleaning and inspecting Protect the housing with robust and the main O-ring each time after diving for shock-proof travel case during trans- any damage and every time the housing portation. -
Page 18: Warranty
NAUTICAM accepts no liability for any damage to and defects in the housing caused by improper use and/or poor maintenance; it is the responsibility of the own- er to carefully follow the instructions in our manuals. -
Page 19: Specifications
Hard Anodized Aluminium Alloy 25624 M14 Vacuum Valve II (Pushbutton Release) 25625 M16 Vacuum Valve II (Pushbutton Release) Display window Abrasion Resistant Polycarbonate 32211 Nauticam Full Frame Straight Viewfinder 32°/ 1:1 Dimensions 32212 Nauticam Full Frame Straight Viewfinder 40°/ 0.8:1 Width 320 mm 32213 Nauticam Full Frame Angle Viewinder 32°/ 1:1... - Page 20 Monitor options ( 2.0 ) Monitor options ( 1.4 ) 17922 Nauticam Atomos Ninja V Housing for Atomos Ninja V 5” 17923 NA-Shinobi-H Housing for Atomos Shinobi 5.2” 4K HDMI Monitor 17922S Nauticam Atomos Ninja V-S Housing for Atomos Ninja V 5”...
- Page 21 Nauticam Internationl Ltd. Rm 2203, CCT Telecom Bldg, 11 Wo Shing St, Fo Tan, Hong Kong Tel. +852 - 26902711 Fax. +852 - 26909778 URL. www.nauticam.com Gallery. www.nauticam.smugmug.com...
Need help?
Do you have a question about the NA-R6II and is the answer not in the manual?
Questions and answers