CAME FUTURAKITVC04 Installation Manual page 7

E
F
G
I
2

B
a
A
1
During installation of the recessed box use the provided spacer to
prevent deformation F . With the Allen wrench unscrew the
blocking screws and remove the entry panel plate A. Introduce
the cable connections in the special hole B and fix the entry
panel on the frame as shown in figure G; extract the plastic
terminal cover and wire the connections D.
Once the connections have been made and re-insert the terminal
covers. For the installation of the accessories refer to the chapter
"Button module installation".
Perform the programming and adjustment operations of the entry
panel as described to the chapter "Programming". Install the front
plate A.
Button module installation
Insert the button module as highlighted H paying special atten-
tion to the top to bottom orientation J.
Remove the glass and write the user names I, paying special
attention to the orientation of the glass J.
H
J