Mitsubishi Electric MELSECQ Series User Manual page 81

6
UTILITY PACKAGE (GX Configurator-CT)
Downloaded from ManualsNet.com
Table 6.2 Maximum number of settable parameters using GX Configurator
When intelligent function modules
are installed to:
Q00J/Q00/Q01CPU
Q02/Q02H/Q06H/Q12H/Q25HCPU
Q02PH/Q06PH/Q12PH/Q25PHCPU
Q12PRH/Q25PRHCPU
Q00UJ/Q00U/Q01UCPU
Q02UCPU
Q03UD/Q04UDH/Q06UDH/Q10UDH/
Q13UDH/Q20UDH/Q26UDH/
Q03UDE/Q04UDEH/Q06UDEH/
Q10UDEH/Q13UDEH/Q20UDEH/
Q26UDEHCPU
Q50UDEH/Q100UDEHCPU
MELSECNET/H remote I/O station
For example, if multiple intelligent function modules are installed to the MELSECNET/
H remote I/O station, configure the settings in GX Configurator so that the number of
parameter settings for all the intelligent function modules does not exceed the limit of
the MELSECNET/H remote I/O station. Calculate the total number of parameter
settings separately for the initial setting and for the auto refresh setting.
The number of parameters that can be set for one module in GX Configurator-CT is
as shown below.
Target module
QD63P6
Example) Counting the number of parameter settings in Auto refresh setting
Figure 6.1 Numeration for the number of parameters set in auto refresh setting
search engine
Maximum number of parameter settings
Initial setting
512
512
512
512
512
2048
4096
Use prohibited
512
Table 6.3 Number of settable parameters per module
Initial setting
6 (fixed)
This one row is counted as one
setting.
Blank rows are not counted.
Count up all the setting items on this
screen, and add the total to the
number of settings for other intelligent
function modules to get a grand total.
6.2 Installing and Uninstalling the Utility Package
6.2.1 Handling precautions
Auto refresh setting
256
256
256
256
256
1024
2048
Use prohibited
256
Auto refresh setting
48 (Max.)
6
- 3
1
2
3
4
5
6
7
8