Warranty Registration | Features | Installation - ADJ 12P HEX IP User Manual

W A R R A N T Y R E G I S T R A T I O N
The 12P Hex IP carries a 2 year (730 days) limited warranty. Please fill out the enclosed warranty
card to validate your purchase. All returned service items, whether under warranty or not, must be
freight pre-paid and accompanied by a return authorization (R.A.) number. The R.A. number must be
clearly written on the outside of the return package. A brief description of the problem, as well as the
R.A. number, must also be written down on a piece of paper included in the shipping carton. If the
unit is under warranty, you must provide a copy of your proof of purchase invoice. You may obtain an
R.A. number by contacting our customer support team on our customer support number. All packages
returned to the service department not displaying an R.A. number on the outside of the package will be
returned to the shipper.
F E A T U R E S
• Multi-Colors
• Five Operating Modes
• Electronic Dimming 0-100%
• DMX-512 protocol
• IP65 Locking 5-Pin XLR Connections In/Out
• Four DMX Modes: 6, 7, 8, and 13-channel modes
Multiple Unit Power Linking (See Multiple Unit Power Linking section of this manual)
•
INCLUDED ITEMS
• IP65 Locking Power Cable (x1)
I N S T A L L A T I O N
The unit should be mounted using a mounting clamp (not provided), and affixing it to the mounting
bracket that is provided with the unit. Always ensure that the unit is firmly fixed to avoid vibration and
slipping during operation. Always ensure that the structure to which you are attaching the unit is secure
and is able to support at least 10 times the unit's weight. Always use a safety cable that can hold at
least 12 times the weight of the unit when installing the fixture. The equipment must be installed by a
professional, and it must be installed in a place where it is out of the reach of the general public.
Ensure ALL connections and end caps are properly sealed with a non-conductive dielectric
grease (available at most electronics suppliers) to prevent water ingress/condensation and/or
corrosion.
6