ADJ 12P HEX IP User Manual page 2

©2022 ADJ Products, LLC all rights reserved. Information, specifications, diagrams, images, and
instructions herein are subject to change without notice. ADJ Products, LLC logo and identifying prod-
uct names and numbers herein are trademarks of ADJ Products, LLC. Copyright protection claimed
includes all forms and matters of copyrightable materials and information now allowed by statutory or
judicial law or hereinafter granted. Product names used in this document may be trademarks or regis-
tered trademarks of their respective companies and are hereby acknowledged. All non-ADJ Products,
LLC brands and product names are trademarks or registered trademarks of their respective compa-
nies.
ADJ Products, LLC and all affiliated companies hereby disclaim any and all liabilities for property,
equipment, building, and electrical damages, injuries to any persons, and direct or indirect economic
loss associated with the use or reliance of any information contained within this document, and/or as
a result of the improper, unsafe, insufficient and negligent assembly, installation, rigging, and opera-
tion of this product.
DOCUMENT VERSION
Due to additional product features and/or enhancements, an updated version of
this document may be available online.
Please check
before beginning installation and/or programming.
Document
Date
Version
05/25/2018
01/09/2020
09/03/2020
02/19/2021
06/23/2021
06/17/2022
Europe Energy Saving Notice
Energy Saving Matters (EuP 2009/125/EC)
Saving electric energy is a key to help protecting the enviroment. Please turn off all electrical products when
they are not in use. To avoid power consumption in idle mode, disconnect all electrical equipment from power
when not in use. Thank you!
www.adj.com
Software
Version
1 1.04
1.2 N/C
1.3 1.08
1.4 1.09
1.5 N/C
1.6 N/C
for the latest revision/update of this manual
DMX Channels Notes
6/7/8/13 Initial Version
No Change 3-pin connection replaced with 5-pin
No Change Updated primary/secondary mode
No Change Updated system menu
No Change Approvals added to manual
Updated specifications and IP Notice;
No Change
added RDM
2