ADJ 12P HEX IP User Manual page 23

O P E R A T I N G I N S T R U C T I O N S
Static Color Mode:
1. Access the main menu, and press the UP or DOWN buttons so that "Menu Function" is highlight-
ed, then press ENTER.
2. Use the UP or DOWN buttons to highlight "1. STATC CL:X" and press ENTER. "X" is the current
color that is displayed.
3. Use the UP or DOWN buttons to scroll through the static color choices, and press ENTER to con-
firm your selection and move on to the strobe function set up.
4. Use the UP and DOWN buttons to adjust the strobe rate. Press ENTER after you have found your
desired strobe rate.
Color Macro Mode:
1. Access the main menu and press the UP or DOWN buttons until "Menu Function" is displayed,
and then press ENTER.
2. Press the UP or DOWN buttons until "Macros" is displayed and press ENTER.
3. There are 64 colors to choose from. Find your desired color using the UP and DOWN buttons.
Once you have found your desired color press ENTER.
LCD Display Settings:
1. Access the main menu and press the UP or DOWN buttons until "Menu Function" is displayed,
and press ENTER.
2. Press the UP or DOWN buttons until "LCD.Set" is displayed and press ENTER.
3. Use the UP and DOWN buttons to select from the 3 LCD Display settings options, then press EN-
TER to select an option. Use the UP and DOWN options to make adjustments, and press ENTER
to move on to the next setting.
• "Backlight" - This lets you set how long the backlight display will stay on.
• "Key Lock" - This lets you control the key lock feature.
- "ON" - Press the MODE button for 10 seconds to unlock the keypad.
- "OFF" - The keypad is unlocked, simply press the MODE button to activate the keypad.
- "ON1" - This setting is used to prevent the accidental unlocking of the keypad. To unlock the
keypad you will have to enter a passcode. Press the MODE button and the display will show
"LOCKED *****". To unlock the keypad press UP, DOWN, UP, DOWN, & ENTER in that order.
• "DisFlash" - Display flash.
Default Running Mode: When this mode is activated, all settings will revert to their original factory
default settings.
1. Access the main menu and press the MODE button and press the UP or DOWN buttons until
"Menu Function" is displayed, and press ENTER.
2. Press the UP or DOWN buttons until "DFSET" displayed, and press ENTER.
3. Use the UP or DOWN button to toggle between "ON' and "OFF", press ENTER to make your se-
lection. Press the MODE button to exit without making changes.
23