ADJ 12P HEX IP User Manual page 24

O P E R A T I N G I N S T R U C T I O N S
Unit Temperature: Switch the temperature units between Celsius and Fahrenheit.
1. Access the main menu and press the UP or DOWN buttons until "Menu Function" is displayed,
and then press ENTER.
2. Press the UP or DOWN buttons until "Temp" is displayed and press ENTER.
3. Use the UP and DOWN buttons to switch between "Fahren" and "Celsius".
4. Press ENTER to confirm your selection.
White Balance Settings: Adjust RGBWA & UV colors to balance the white color.
1. Access the main menu and press the UP or DOWN buttons until "Menu Function" is displayed,
and then press ENTER.
2. Press the UP or DOWN buttons until "Settings WhiteBal" is displayed and press ENTER.
3. Use the UP and DOWN buttons to switch between the colors. When you have found the color you
wish to adjust, press ENTER, then use the UP or DOWN button to adjust the color values.
4. Press ENTER to confirm your selection.
Frequency Setting: Adjust the LED refresh rate.
1. Access the main menu and press the UP or DOWN buttons until "Menu Function" is displayed,
and then press ENTER.
2. Press the UP or DOWN buttons until "Fre_hz" is displayed and press ENTER.
3. Use the UP and DOWN buttons to scroll through different frequencies.
4. Press ENTER to confirm your selection.
Gamma Brightness Setting: Adjust the gamma brightness. Note: This setting was removed from the
system menu starting with software version V1.07.
1. Access the main men u and press the UP or DOWN buttons until "Menu Function" is displayed,
and then press ENTER.
2. Press the UP or DOWN buttons until "Gamma" is displayed and press ENTER.
3. Use the UP and DOWN buttons to scroll through different settings.
4. Press ENTER to confirm your selection.
Dimmer Curve Setting: Select a dimmer curve. Note: This setting was added to the main menu with
software version V1.07.
1. Access the main menu, and press the UP or DOWN buttons so that "Menu Function" is highlight-
ed, then press ENTER.
2. Press the UP or DOWN buttons so that "Dim Mode" is highlighted, then press ENTER.
3. Press the UP or DOWN buttons to scroll through the 4 available dimmer curve options, and press
ENTER to select your desired choice. Please see the Dimmer Curve Chart section of this manu-
al for detailed information.
24