Asi Output Monitor; Ip Input Monitor - evertz 7880IP-ASI-IP Manual

7700/7800 MultiFrame Manual
7880IP-ASI-IP IP/ASI/IP Converter
• Stream Delay (ms): This field enables the user to set the size of the stream delay. A larger stream
delay value will correspond to a larger buffer size. The total delay through the card is equal to the
decapsulation processing time, plus FEC processing time, plus the stream delay time.
recommended stream delay value is 60 ms.

4.3.3. ASI Output Monitor

• ASI Port Status: This field displays the status of the ASI signal whether it is Active or Inactive.
• Serial Output Operating Mode: This field displays the operating mode of the serial output. It will
display ASI or IP.
• ASI TS Bitrate: This field displays the overall bit rate of the incoming ASI signal.
• Serial Output Port Video Standard: This field displays the video standard of the serial output port.
• Clear ASI Stats: The ASI monitoring fields can be reset at any time by selecting the "Clear ASI
Stats" button. To apply the new setting, click the Apply button and the statistics will be reset and
begin counting from zero again.

4.3.4. IP Input Monitor

• Stream Type: This field will display whether the card is set to unicast or multicast.
• Received Ethernet Bandwidth: This field will display the current bitrate of the input IP stream
• Received IP Packets: This field will display the current total number of received IP packets.
• Received TS Packets: This field will display the current total number of received TS packets.
• UDP/RTP Protocol: This field will display the protocol setting depending on the incoming packets.
The options will be either UDP or RTP.
• TS Packet Per IP Packet: This field will display the number of TS packets within each IP packet.
• TS Packet Size: This field will display the TS packet size. The values will be either 188 bytes or
204 bytes.
• FEC Mode: This field will display the FEC mode. The FEC packet mode will display either Off,
FEC 2D or FEC 1D.
• FEC Column: This field displays the number of packets per column to be associated with an FEC
packet.
• FEC Row: This field displays the number of packets per row to be associated with an FEC packet.
• Number of Corrected FEC Frames: This field will display the number of corrected frames by FEC.
• Number of Uncorrected FEC Frames: This field will display the number of uncorrected frames by
FEC.
Page 18
Revision 1.1
The