Advertisement
Mark the ground in the final building location with a line showing the positions of base
plates, front, and rear doors. All lines should be drawn from center to center of all
baseplate tubes. Diagonal line X must be equal to Y.
Baseplates: all baseplates must be installed firmly with expansion bolts (#16) on this
step (Picture 1).
Parts used in this step :
(4) Baseplates (#5L,#5R)
-
(10) Baseplates (#7)
-
(2) Baseplates (#6)
-
(52) Expansion bolts M16 (#16)
-
(3) Baseplates (6A)
-
Step 2 : Assemble all trusses
The building includes 7 trusses : (1) front truss, (1) rear truss, and (5) middle
trusses. The front and the rear truss are to install with the fabric panel (#23 and
#23A).
Parts used to install the front truss in this step (refer to Picture 2) :
-
-
-
W W W . T M G I N D U S T R I A L . C O M
(1) Peak arch tube (#1)
(2) Upper rafter tube (#2A)
(2) Shoulder tube (#3A)
P 6 / 1 6
T o l l F r e e : 1 - 8 7 7 - 7 6 1 - 2 8 1 9
Picture 1
Advertisement
