Table of Contents
Advertisement
Message
Possible Cause
INPUT TEXT!
Attempt made to perform
text save without input-
ting text first.
INPUT TEXT
Selecting enlarged
WILL BE
printing, the barcode
CLEARED!
printing menu (PRE-
OK TO
SETS), or the data
CONTINUE?
c o m m u n i c a t i o n
SET/ESC
m e n u ( C O M P U T E R
LINK) while there is in-
put text on the display.
LABEL HAS
Too many lines to be
TOO MANY
printed.
LINES!
LABEL IS
Tape length specified
LONGER THAN
for printing is longer
TAPE LENGTH!
than the actual tape
SET/ESC
length.
LENGTH OF
When printing text that
PRINT IS TOO
is longer than the al-
LONG!
lowed length, the
length of each piece is
too long, or the number
of copies specification
causes the total print
length to be longer
than eight meters.
LOAD A TAPE
Loaded tape width is
CARTRIDGE
less than 18mm during
THAT IS 18mm
barcode printing.
OR WIDER
E-46
Action
Page
Input text and then per-
E-36
form text save opera-
tion.
To proceed with the
E-33
operation and delete
E-38
the text, press SET.
To cancel the opera-
tion, press ESC and
then save the text.
E-13
Reduce the number of
lines or use a wider
tape.
To proceed with the
E-15
print operation, press
E-28
SET.
To cancel printing,
press ESC. Next, you
can correct the con-
dition by reducing the
number of charac-
ters, changing the
tape length setting, or
turning on automatic
tape length setting.
Shorten
the
print
E-28
E-29
length or reduce the
number of copies.
Use a tape cartridge
E-8
E-34
that is 18 mm or wider.
Message
Possible Cause
LOAD A TAPE
Loaded tape width is
CARTRIDGE
less than 36mm during
THAT IS 36mm
enlarged printing.
OR WIDER
LOOK FOR?
No text in memory
NOT FOUND!
matches what you
specified.
MEMORY FULL!
Memory is full.
NO DATA!
There is no data stored
in memory.
NOT ENOUGH
Not enough memory to
MEMORY!
store a barcode.
SET/ESC
PRESS [SET]
Input characters were
TO RECALL
left on the display the
last time power was
turned off.
Action
Page
Use a tape cartridge
E-8
that is 36 mm or wider.
E-33
E-42
Specify the correct text
E-36
or scroll through text in
E-37
memory to find what
you want.
Delete data you no
E-36
longer need to make
room for more data.
You must have data in
E-36
memory before you
can search for data.
To print the barcode
E-35
without storing it,
E-36
press SET.
To store the barcode,
press ESC to return to
the PRESETS menu.
Delete memory data
you no longer need
and then perform the
barcode store opera-
tion again.
To recall the text that
E-8
was last on the dis-
E-39
play, press SET.
To perform another
operation without re-
calling text, simply
perform the opera-
tion.
Advertisement
Table of Contents
