Putting Into Service; Inserting Batteries In The Mobile Unit - Siemens 300 Operating Instructions Manual

Putting into service

Read the safety notes on page 6 first!
Hold the mobile unit with the dialling keypad facing downwards. A
battery compartment for 2 batteries is located in the lower part of the
mobile unit.
To open the battery compartment, slide the lid upwards in the direction
of the arrow (see Figure 2).
Insert the two batteries supplied in the battery compartment as shown
in Figure 2.
Ensure that the batteries are inserted correctly (polarity illustrated on
the label in the battery compartment).
The battery compartment cannot be closed if batteries are inserted
incorrectly.
Slide the lid of the battery compartment downwards into the grooves on
the mobile unit (see Figure 2) until the compartment is closed.
Figure 2: Rear of mobile unit, battery compartment open
15