Activating/Deactivating Mobile Units; Activating/Deactivating Keypad Protection - Siemens 300 Operating Instructions Manual

Note:
In the case of Hicom cordless E, the mobile units are not logged on to
stations (base stations), but rather to the Hicom 300 telephone system.
In this case,
An error tone is audible if the logon operation was not successful.
Activating the mobile unit:
Deactivating the mobile unit:
This allows you to protect your mobile unit against inadvertent key activation,
e.g. when carrying it in your bag. Call are signalled even if keypad protection
is on and can be answered as in the same way as when the telephone is
switched on.
Prerequisite: mobile unit is activated.
Activating keypad protection:
Keyboard
protected
Deactivating keypad protection:
Putting into service
always means system.
Press the On/Off key - you hear the acknowledgement
tone.
Display when telephone is "on" status, see page 8.
Press the On/Off key until the display is clear – you hear
the acknowledgement tone.
Press the On/Off key for less than 1 second.
Display when keypad protection is on.
Press the On/Off key briefly – display when telephone
is "on", see page 8.
19