Putting Your Phone Into Operation - Siemens optipoint 200 User Manual

Gigaset 200, GBR, A31008-G200-B101-1-7619

Putting your phone into operation

Step 1: Connect up the base unit
For the analog landline network
Phone connector
with phone cable
1
Insert the small connector of the line cord into
the socket (engages).
Insert the cable in the cable duct.
Insert the phone connector in the phone socket.
2
Insert the small connector of the power cable
into the socket.
Insert the cable in the cable duct.
Plug the 3-pin adaptor into a mains power socket
and switch on.
*Country-specific
6
VORBEREI.FM
Plug-in power supply unit with
power cable (220/230 V)*
1
28.09.01
2