Error Messages/Display Messages - Casio KL-7200 User Manual

Using Labels
Label will not adhere to a surface.
Possible Causes
The backing paper is still Peel the backing paper from the back
on the back of the tape. of the tape to expose the adhesive.
Surface is unsuitable for Labels do not adhere well to surfaces
affixing a tape. that are rough, wet, oily, or dirty.
Action Page
E-16
E-16

Error Messages/Display Messages

Message Possible Causes
The number carriage
¥
ERROR!
returns you input causes
* This message
the label to exceed the
appears on the
maximum number of lines
screen for about
for the tape you are
one second.
using.
NO DATA You are attempting to
recall text from memory
* This message
when there is none
appears on the
stored.
screen for about
one second.
OVERWRITE? You are attempting to
store text in memory
when it already contains
text.
No. ERROR! You pressed SET while a
non-numeric character
was highlighted when
specifying the first digit for
a sequential number.
TAPE ERROR! You are attempting to
print a stamp using a tape
size other than 18mm.
You are attempting to
print a stamp without
setting a tape cartridge.
Action
Use wider tape or
reduce the number of
lines.
6mm tape...1 line
9mm tape...1 line
12mm tape...Up to 2 lines
18mm tape...Up to 3 lines
24mm tape...Up to 3 lines
Press SET to overwrite
the existing text with the
new text, or ESC to
cancel the store
operation.
Press any key besides
ON/OFF and then
highlight a number.
Use only 18mm tape to
print a stamp.
Turn the power OFF and
set the tape cartridge.
E-23