Casio KL-7200 User Manual page 23

Casio user's guide label printer kl-7200
Table of Contents

Advertisement

Tape does not come out when PRINT is pressed.
Possible Causes
Tape cartridge compart-
Securely close the cover.
ment cover is not closed
completely.
No more tape left in the
Replace the tape cartridge with a
cartridge.
new one.
Tape jam
Remove the tape cartridge and pull
out the jammed tape by hand. Cut off
excess tape with scissors, and
carefully replace the cartridge into
the Label Printer.
Important!
Never allow the tape outlet to
become blocked and never touch
tape as it is being fed during printing.
Tape comes out when PRINT is pressed, but nothing is printed on it.
Possible Causes
Only blank spaces were
Input the text you want to print.
input.
Printing is blurred, blotched, broken, etc.
Possible Causes
Improper print density
Adjust the print density setting.
setting
Improper loading of the
Remove the tape cartridge and
cartridge
reload it correctly.
Dirty printer head or
Clean the printer head and roller.
rubber roller
E-22
Action
Page
E-7
E-7
E-7
Action
Page
E-9
Action
Page
E-17
E-7
E-20
Ink ribbon is being fed from the tape outlet along with the tape.
Possible Causes
Ink ribbon cassette
Remove the ink ribbon cassette and
loaded while the ink
check to make sure the ink ribbon is
ribbon is slack.
not broken. Next, take up any slack
in the ink ribbon and then reload the
tape cartridge.
Important!
Before loading an ink ribbon
cassette into the Label Printer,
always make sure you take up any
slack in the ink ribbon first.
If the ink ribbon is broken, you
must change to another ink ribbon
cassette.
Tape Cutting
Cannot cut tape.
Possible Causes
Tape cutter blade is dull.
Take the label printer to the dealer
from whom you purchased it to have
the tape cutter blade replaced.
Printed text is cut off by tape cut operation.
Possible Causes
The printer is set up for
Be sure to press the FUNC FEED key
manual tape feed.
before performing the tape cut
operation.
Important!
When the printer is set up for manual
tape feed, the tape is not fed automati-
cally after printing is complete.
Out of tape
Replace the tape cartridge with a new
one.
Action
Page
E-7
Action
Page
Action
Page
E-17
E-7

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents