D2D And Ddcs Receive Data - ABB ACS880 Manual

462 Parameters
No. Name / Range /
Selection
62 D2D and DDCS
receive data
62.1 M/F data 1 selection
None
CW 16bit
Ref1 16bit
Ref2 16bit
M/F velocity
M/F position
Other
62.2 M/F data 2 selection
62.3 M/F data 3 selection
62.4 Follower node 2 data
1 sel
None
Follower SW
Other
62.5 Follower node 2 data
2 sel
62.6 Follower node 2 data
3 sel
Description
Mapping of data received through the DDCS link.
See also parameter group
(Follower only) Defines a target for the data received as
word 1 from the master through the master/follower link.
See also parameter 62.25 M/F data 1
None.
Control Word (16 bits)
Reference REF1 (16 bits)
Reference REF2 (16 bits)
Scaled velocity value.
Note: This selection should be chosen for the same data
word as was set to D2D velocity in the master.
32-bit position value.
Note: This selection should be chosen for the same data
word as was set to D2D position in the master. (The setting
will automatically reserve two consecutive data words.)
See Terms and abbreviations (page
(Follower only) Defines a target for the data received as
word 2 from the master through the master/follower link.
See also parameter 62.26 M/F data 2
For the selections, see parameter
selection.
(Follower only) Defines a target for the data received as
word 3 from the master through the master/follower link.
See also parameter 62.27 M/F data 3
For the selections, see parameter
selection.
Defines a target for the data received as word 1 from the
first follower (ie. the follower with node address 2) through
the master/follower link.
See also parameter 62.28 Follower node 2 data 1
None.
Status word of the follower. See also parameter
Follower enable.
See Terms and abbreviations (page
Defines a target for the data received as word 2 from the
first follower (ie. the follower with node address 2) through
the master/follower link.
See also parameter 62.29 Follower node 2 data 2
For the selections, see parameter
data 1 sel.
Defines a target for the data received as word 3 from the
first follower (ie. the follower with node address 2) through
the master/follower link.
See also parameter 62.30 Follower node 2 data 3
For the selections, see parameter
data 1 sel.
60 DDCS communication.
value.
132).
value.
62.1 M/F data 1
value.
62.1 M/F data 1
value.
60.18
132).
value.
62.4 Follower node 2
value.
62.4 Follower node 2
Def / Type
FbEq 16b / 32b
None / uint32
0
1
2
3
4
30
None / uint32
None / uint32
Follower SW / uint32
0
26
None / uint32
None / uint32