Port Triggering - TP-Link TL-WR841N User Manual

Chapter 4
Done!
4 7 2
Port triggering can specify a triggering port and its corresponding external ports. When
a host in the local network initiates a connection to the triggering port, all the external
Downloaded from ManualsNet.com
Personal Website
1 Set your PC to a static IP address, for example 192.168.0.100.
2 Visit http://tplinkwifi.net, and log in with the username and
password you set for the router.
3 Go to
4 Click
Port
will be automatically filled in. Enter the PC's IP address
192.168.0.100 in the
5 Leave the status as
Note:
• It is recommended to keep the default settings of
if you are not clear about which port and protocol to use.
• If the service you want to use is not in the
can enter the corresponding parameters manually. You should verify the
port number that the service needs.
• You can add multiple virtual server rules if you want to provide several
services in a router. Please note that the
overlapped.
Users on the internet can enter
http:// 218.18.232.154) to visit your personal website.
Note:
• If you have changed the default
Service Port
• Some specific service ports are forbidden by the ISP, if you fail to visit the
website, please use another service port.

Port Triggering

search engine
Configure the Router in Wireless Router Mode
Router
LAN WAN: 218.18.232.154
Home
Forwarding > Virtual Server.
Add New. Select HTTP
list. The service port, internal port and protocol
IP Address
Enabled
Service
to visit the website.
from the Common Service
field.
and click Save.
Internal Port and
Common Service Port
Service Port should not be
http:// WAN IP (in this example:
Port, you should use http:// WAN IP:
Protocol
list, you
38