Chapter 6
with another nearby access point. If you select Auto, then AP will choose the best
channel automatically.
•
Enable SSID Broadcast
name (SSID).
6 4 2
WPS (Wi-Fi Protected Setup) can help you to quickly and securely connect to a network.
This section will guide you to add a new wireless device to your router's network quickly
via WPS.
Note:
The WPS function cannot be configured if the wireless function of the router is disabled. Please make sure the wireless
function is enabled before configuration.
1. Visit http://tplinkwifi.net, and log in with the username and password you set for the
router.
2. Go to
3. Follow one of the following three methods to connect your client device to the
router's Wi-Fi network.
Method ONE: Press the WPS Button on Your Client Device
1. Keep the WPS Status as
2. Select
Connect.
3. Within two minutes, press the WPS button on your client device.
4. A success message will appear on the WPS page if the client device has been
successfully added to the router's network.
Downloaded from
ManualsNet.com
- If enabled, the router will broadcast the wireless network
WPS
Wireless
> WPS.
Enabled
Press the WPS button of the new device within the next two minutes
search engine
Configure the Router in Access Point Mode
and click
Add
Device.
and click
128