Ipv6 Lan; System Tools; Time Settings - TP-Link TL-WR841N User Manual

Chapter 4
•
4 15 3
1 Visit http://tplinkwifi.net, and log in with the username and password you set for the
router.
2 Go to
•
•
Note:
If your IPv6 wan connection type is "Tunnel 6to4", the Site Prefix Configuration Type should be "Static" to make
sure "Tunnel 6to4" works properly.
4 16
4 16 1
This page allows you to set the time manually or to configure automatic time
synchronization. The router can automatically update the time from an NTP server via
the internet.
1. Visit http://tplinkwifi.net, and log in with the username and password you set for the
router.
Downloaded from ManualsNet.com
WAN Connection - Display the available wan connection.

IPv6 LAN

IPv6 > IPv6 LAN and configure the IPv6 LAN settings as needed.
Address Auto-Configuration Type
the computers in your LAN. RADVD and DHCPv6 Server are provided.
Site Prefix Configuration Type
• Delegated - Get the IPv6 address prefix from the ISP automatically, and the
device will delegate it to the LAN.
• Static - Configure the
contact your ISP to get more information before you configure them.

System Tools

Time Settings

search engine
Configure the Router in Wireless Router Mode
- Select a type to assign IPv6 addresses to
- The type of IPv6 address prefix.
Site Prefix and Site Prefix Length manually. Please
61