Chapter 7
How can I
do that?
Done!
7 4 4
1. Visit http://tplinkwifi.net, and log in with the username and password you set for the
router.
2. Go to
Downloaded from
ManualsNet.com
1 Visit http://tplinkwifi.net, and log in with the username and
password you set for the router.
2 Go to
3 Click
4 Select
the list to access
5 Delete all or disable all entries if there are any entries already.
6 Click
1 ) Enter
00:0A:EB:00:07:5F in the MAC Address field.
2 ) Enter wireless client A/B in the Description field.
3 ) Select
4 ) Click
7 The configured filtering rules should be listed as the picture
shows below.
Now only client A and client B can access your network.
Wireless Advanced
Wireless
>
Wireless
Advanced.
search engine
Configure the Router in Range Extender Mode
Wireless
>
Wireless MAC
Enable
to enable the Wireless MAC Filtering function.
Allow the stations specified by any enabled entries in
as the filtering rule.
Add New
and fill in the blank.
the
MAC
address
Enabled
in the Status drop-down list.
Save
and click Back.
Filtering.
00:0A:EB:B0:00:0B
/
152