Open Ports Dynamically By Port Triggering - TP-Link EX1110 Manual

Chapter 13
5. Enter the IP address of the computer running the service application in the Internal
IP field.
6. Select a protocol for the service application: TCP, UDP, or All from the Protocol drop-
down list.
7. Select Enable This
8. Click OK.
Tips:
• If you want to disable this entry, click the Bulb icon.
• It is recommended to keep the default settings of Internal Port and Protocol if you are not clear about which port or
protocol to use.
• If the local host device is hosting more than one type of available services, you need to create a rule for each service.
Please note that the External Port should NOT be overlapped.
13 3

Open Ports Dynamically by Port Triggering

Port Triggering can specify a triggering port and its corresponding external ports.
When a host on the local network initiates a connection to the triggering port, all the
external ports will be opened for subsequent connections. The router can record the
IP address of the host. When the data from the internet return to the external ports, the
router can forward them to the corresponding host. Port Triggering is mainly applied to
online games, VoIPs, video players and common applications including MSN Gaming
Zone, Dialpad and Quick Time 4 players, etc.
Follow the steps below to configure the Port Triggering rules:
1. Visit http://tplinkwifi.net
password you set for the router.
2. Go to Advanced >
Entry.
or http://192.168.0.1, and log in with your TP-Link ID or the
NAT Forwarding > Port Triggering
NAT Forwarding
and click .
110