TP-Link TL-WR841N User Manual page 124

Chapter 5
•
•
•
Note:
You can use ping/traceroute to test both numeric IP address or domain name. If pinging/tracerouting the IP address
is successful, but pinging/tracerouting the domain name is not, you might have a name resolution problem. In this
case, ensure that the domain name you are specifying can be resolved by using Domain Name System (DNS)
queries.
•
•
•
•
•
3. Click
4. The
the following figure, the connectivity of the internet is fine.
Downloaded from ManualsNet.com
Diagnostic Tool - Select one diagnostic tool.
Ping - This diagnostic tool troubleshoots connectivity, reachability, and name
resolution to a given host or gateway.
Tracerouter - This diagnostic tool tests the performance of a connection.
IP Address/Domain Name
192.168.0.1) or Domain name (such as www.tp-link.com).
Pings Count - The number of Ping packets for a Ping connection.
Ping Packet Size - The size of Ping packet.
Ping Timeout - Set the waiting time for the reply of each Ping packet. If there is
no reply in the specified time, the connection is overtime.
Traceroute Max TTL - The max number of hops for a Traceroute connection.
Start to check the connectivity of the internet.
Diagnostic Results page displays the diagnosis result. If the result is similar to
search engine
Configure the Router in WISP Mode
- Enter the destination IP address (such as
118