Chapter 4
Note:
Dos Protection will take effect only when the Statistics in
•
Enable ICMP-FLOOD Attack Filtering
function.
•
ICMP-FLOOD Packets Threshold (5~3600)
between 5 ~ 3600. When the number of the current ICMP-FLOOD packets is beyond
the set value, the router will startup the blocking function immediately.
•
Enable UDP-FLOOD Attack Filtering
•
UDP-FLOOD Packets Threshold (5~3600)
between 5 ~ 3600. When the number of the current UPD-FLOOD packets is beyond
the set value, the router will startup the blocking function immediately.
•
Enable TCP-SYN-FLOOD Attack Filtering
function.
•
TCP-SYN-FLOOD Packets Threshold (5~3600)
between 5 ~ 3600. When the number of the current TCP-SYN-FLOOD packets is
beyond the set value, the router will startup the blocking function immediately.
•
Forbit Ping Packet From WAN Port
ping packet from the internet cannot access the router.
•
Forbid Ping Packet From LAN Port
ping packet from LAN cannot access the router. This function can be used to defend
against some viruses.
3. Click Save.
4. Click
4 8 3
1. Visit http://tplinkwifi.net, and log in with the username and password you set for the
router.
2. Go to
accessing the router.
Downloaded from
ManualsNet.com
Blocked DoS Host List
Local Management
Security
>
Local
Management, and you can block computers on the LAN from
search engine
Configure the Router in Wireless Router Mode
System Tool
>
Statistics
- Tick the checkbox to enable or disable this
- The default value is 50. Enter a value
- Tick the checkbox to enable this function.
- The default value is 500. Enter a value
-Tick the checkbox to enable or disable this
- The default value is 50. Enter a value
- The default setting is disabled. If enabled, the
- The default setting is disabled. If enabled, the
to display the DoS host table by blocking.
is enabled.
44