Open Ports Dynamically By Port Triggering - TP-Link HC220-G5 User Manual

Chapter 11
Done!

11. 3. Open Ports Dynamically by Port Triggering

Port triggering can specify a triggering port and its corresponding external ports.
When a host in the local network initiates a connection to the triggering port, all the
external ports will be opened for subsequent connections. The router can record the IP
4. Click View Existing
external port, internal port and protocol will be automatically
filled in. Enter the PC's IP address 192.168.0.100 in the
Internal IP field.
5. Click OK to make the settings effective.
Tips:
1. It is recommended to keep the default settings of
if you are not clear about which port and protocol to use.
2. If the service you want to use is not in the
corresponding parameters manually. You should verify the port number
that the service needs.
3. You can add multiple virtual server rules if you want to provide several
services from a controller. Please note that the
overlapped.
Internet users can enter
http://218.18.232.154) to visit your personal website.
Tips:
1. For a WAN IP that is assigned dynamically by ISP, it is recommended to apply
and register a domain name for the WAN by DDNS, go to
DNS Service Account
name to visit the website.
2. If you have changed the default
IP: External Port or http://domain name: External Port
Applications, and choose HTTP. The
Service
http://WAN IP
for more information. Then you can use
External Port, you should use
NAT Forwarding
Internal Port and Protocol
Type, you can enter the
External Port cannot be
(in this example:
Set Up a Dynamic
http://domain
http://WAN
to visit the website.
44