Using The Operation Buttons; Selecting The Input Signal Source; Adjusting The Volume; Muting The Sound - Sharp Conference Series XG-V10WU Operation Manual

Using the Operation Buttons

Selecting the Input Signal Source

Projector

Adjusting the Volume

Projector

Muting the Sound

Projector
E-31
Remote Control
INPUT
buttons
1.2.3 4.5.6
Remote Control
VOLUME
buttons
1.2.3 4.5.6
Conference Series
Remote Control
MUTE
button
1.2.3 4.5.6
Press INPUT 1.2.3 or INPUT 4.5.6 again to change the
mode.
• When no signal is received, "NO SIGNAL" will be displayed.
When a signal that the projector is not preset to receive is
received, "NOT REG." will be displayed.
On-screen Display
INPUT 1 Mode INPUT 2 Mode
INPUT 4 Mode INPUT 5 Mode
Press VOLUME / to adjust the volume.
On-screen Display
Press MUTE to temporarily turn off the sound.
Press MUTE again to turn the sound back on.
On-screen Display
INPUT 3 Mode
INPUT 6 Mode