Lamp Maintenance; Confirming The Lamp Usage Time - Sharp Conference Series XG-V10WU Operation Manual

Sharp lcd projector operation manual
Hide thumbs Also See for Conference Series XG-V10WU:
Table of Contents

Advertisement

Lamp Maintenance

Confirming the Lamp Usage Time

Lamp
The lamp in this projector operates for approximately 1,000 cumulative hours, depending on the usage environ-
ment. (As the usage environment can vary significantly, the projector lamp may not operate for 1,000 hours.) It is
recommended that the lamp be replaced after approximately 900 cumulative hours of use or when you notice a
significant deterioration of the picture and color quality. The lamp usage time can be checked with the On-screen
Display.
CAUTION
• Intense light hazard. Do not attempt to look into the aperture and lens while the projector is operating.
Projector
1, 4
2, 3
(GUI) On-screen Display
Condition
The LAMP REPLACEMENT
indicator lights up red, and "LAMP"
and " " will flash in yellow in the
lower-left corner of the picture.
A significant deterioration of the
picture and color quality occurs.
The power will automatically turn
off and the projector will enter
standby mode.
"LAMP" and " " will flash in red in
the lower-left corner of the picture,
and the power will turn off.
This function allows you to check the accumulated lamp
Remote Control
usage time.
1.2.3
4.5.6
• It is recommended that the lamp be replaced after
Problem
• Lamp has been used for over 900
hours.
• Lamp has been used for over 1,000
hours.
(Slide the MOUSE/ADJUSTMENT switch
on the remote control to the ADJ. position.)
1 Press MENU.
2 Press ß/© to select "Options (2)".
3 Press ∂/ƒ to select "Lamp Timer". The lamp
usage time will be displayed.
4 To exit from the GUI, press MENU.
approximately 900 cumulative hours of use. See pages 71
and 72 for lamp replacement.
Possible Solution
• Purchase a replacement lamp unit
(lamp/cage module) of the current
type BQC-XGV10WU/1 from your
nearest Authorized Sharp Industrial
LCD Products Dealer or Service
Center.
• Replace the lamp. (See pages 71
and 72.) If you wish, you may have
the lamp replaced at your nearest
Authorized Sharp Industrial LCD
Products Dealer or Service Center.
MOUSE
ADJ.
E-70

Advertisement

Table of Contents
loading

This manual is also suitable for:

Rrmcg1564cesaConference seriesXg-v10we

Table of Contents