Watching Dvd And Digital Tv Images; For Better Sound - Sharp Conference Series XG-V10WU Operation Manual

Watching DVD and Digital TV Images

Connecting to a DVD player, DTV decoder and other component video
equipment using the 5 BNC Input
(sold separately)
3
1
Three BNC-RCA adaptors
(Sold separately)

For Better Sound

Connecting to an amplifier and other audio components
Audio cable (sold separately)
e.g. Outputs for Inputs 4, 5
1 Connect each BNC connector of a component cable to the corresponding
BNC INPUT 2 terminals on the projector.
• BNC-RCA adaptors are needed for use with RCA type cables and sources.
2 Connect the other end of the cable to the corresponding terminals on a DVD
player or DTV decoder.
3 To use the built-in audio system, connect one end of an audio cable (sold
separately) to the AUDIO INPUT 2 terminal on the projector.
4 Connect the other end to the audio output terminal on the DVD player or DTV
decorder.
When connecting this projector to a DVD player or DTV decoder, select
"Component" for "Signal Type" on the GUI menu. (See page 45.)
Audio cable
4 To audio output terminals
2 To analog component
Component cable (sold separately)
CAUTION
• Always turn off the projector before connecting to audio components, in order
to protect both the projector and the components being connected.
• By using external audio components, the volume can be amplified for better sound.
• The AUDIO OUTPUT terminals allow you to output audio to audio components from the
selected AUDIO INPUT 1 to 5 terminals connected to audiovisual equipment.
To audio input terminals
output terminals
CAUTION
• Always turn off the projector before connecting to video
equipment, in order to protect both the projector and the
equipment being connected.
Amplifier
DTV decoder
or
DVD player
E-18