Adjusting The Sound - Sharp Conference Series XG-V10WU Operation Manual

Adjusting the Sound

Projector
1, 5
2, 3, 4
(GUI) On-screen Display
2
3
Remote Control This projector's audio is factory preset to standard
settings. However, you can adjust it to suit your own
preferences by adjusting the following audio settings.
Description of Adjustment Items
1.2.3 4.5.6
• To reset all adjustment items, select "Reset" on the "Audio"
Selected item ß button
Increased audio from the left
Balance
speaker
Treble For weaker treble
Bass For weaker bass
Reset All audio adjustment items are returned to the factory preset
settings.
(Slide the MOUSE/ADJUSTMENT switch
on the remote control to the ADJ. position.)
1 Press MENU.
2 Press ß/© to select "Audio".
3 Press ∂/ƒ to select a specific adjustment item.
4 Press ß/© to move the
adjustment item to the desired setting.
5 To exit from the GUI, press MENU.
menu screen and press ENTER.
© button
Increased audio from the right
speaker
For stronger treble
For stronger bass
MOUSE ADJ.
mark of the selected
E-50