Displaying Dual Pictures (Rgb Menu Only) - Sharp XG-V10XU Operation Manual

Displaying Dual Pictures (RGB menu only)

Projector
(GUI) On-screen Display
2
4
300
250
200
150
100
50
0
1996 1997
E-51
Remote Control
1, 6
2, 3
4, 5
1.2.3 4.5.6
A
B
C
1998 1999
Picture in Picture function allows you to display two
pictures on the same screen. You can display the image
input from INPUT 4 or 5 as an inset picture overlapping
the main picture input from INPUT 1, 2 or 3.
(Slide the MOUSE/ADJUSTMENT switch
on the remote control to the ADJ. position.)
1 Press MENU.
2 Press ß/© to select "Options (1)".
3 Press ∂/ƒ to select
4 Press ß/© to select " " to display an inset picture
(Factory preset to INPUT 4).
• The image from INPUT 1, 2 or 3 is displayed as the main
picture and the image from INPUT 4 or 5 is displayed as
the inset picture.
• The last displayed image from INPUT 4 or 5 is displayed as
the inset picture.
For example, when you want to display the image from
INPUT 5 as the inset picture, select INPUT 5, then select
the main picture, and then select "Pict in Pict".
5 Press ß/©/∂/ƒ to move the inset picture to one
of four preset positions.
6 To exit from the GUI, press MENU.
• Inset picture can only be displayed in composite signal of
NTSC/PAL/SECAM.
• When selecting the image for the inset picture, only the
images being input will be displayed.
• The audio of the insert picture will come out of the projector's
speakers.
• Picture in Picture does not work in case of the following
RGB signals.
UXGA signal image
Interlaced signal
DTV (480P/720P/1080i)
• You can only use the following functions while in Picture in
Picture mode.
FREEZE: Works for the inset picture only.
TOOLS: Works with Picture in Picture, but the cursor is
used for TOOLS. The inset picture cannot be
moved.
MOUSE ADJ.
"Pict in Pict".