Table of Contents
Advertisement
Displaying Dual Pictures (RGB menu only)
Picture in Picture function allows you to display two pictures on the same screen. You can display the
image input from INPUT 4 or 5 as an inset picture overlapping the main picture input from INPUT 1, 2 or
3. See page
for the procedure details.
44
You can use this tool by accessing the "Button Assign" list on your GyroRemote. Choose popup list "3/5" and press
Function (4). (See page
1
Press ß to select " " to display an inset picture (Factory preset to INPUT 4).
2
Press ß/©/∂/ƒ to move the inset picture to one of four preset positions.
• The image from INPUT 1, 2 or 3 is displayed as the main picture and the image from INPUT 4 or 5 is displayed as the inset picture.
• The last displayed image from INPUT 4 or 5 is displayed as the inset picture.
For example, when you want to display the image from INPUT 4 as the inset picture, select INPUT 4, then select the main picture, and
then select "Pict in Pict".
• Inset picture can only be displayed in video signal of NTSC/PAL/SECAM.
• When selecting the image for the inset picture, only the images being input will be displayed.
• The audio of the inset picture will come out of the projector's speakers.
• Picture in Picture does not work in case of the following RGB signals.
UXGA signal image/Interlaced signal/DTV (480P/720P/1080i)
• You can only use the following functions while in Picture in Picture mode.
FREEZE: Works for the inset picture only.
Reducing Image Noise (VIDEO menu only)
Digital Noise Reduction (DNR) provides high quality images with minimal dot crawl and cross color
noise. See page
44
• If the image is clear, select "
E-53
33
)
300
250
200
150
100
50
0
1996
1997
1998
1999
for the procedure details.
" to prevent any blurring.
A
B
C
Advertisement
Table of Contents
