Adjusting the Computer Images (RGB menu only)
Projector
1, 5
2, 3, 4
(GUI) On-screen Display
2
3
Remote Control
When displaying computer patterns which are very
detailed (tiling, vertical stripes, etc.), interference may
occur between the LCD pixels, causing flickering,
vertical stripes, or contrast irregularities in portions of
the screen. Should this occur, adjust "Clock", "Phase",
"H-Pos" and "V-Pos" for the optimum computer image.
Description of Adjustment Items
Selected item
Clock
Phase
1.2.3
4.5.6
H-Pos
V-Pos
• Computer image adjustments can be made easily by
Select the desired computer input mode with INPUT 1
(
or 2.)
• To reset all adjustment items, select "Reset" on the "Fine
Description
Adjusts vertical noise.
Adjusts horizontal noise (similar to tracking on your VCR).
Centers the on-screen image by moving it to the left or right.
Centers the on-screen image by moving it up or down.
pressing AUTO SYNC (
). See page 49 for details.
(Slide the MOUSE/ADJUSTMENT switch
on the remote control to the ADJ. position.)
1 Press MENU.
2 Press ß/© to select "Fine Sync".
3 Press ∂/ƒ to select a specific adjustment item.
4 Press ß/© to move the
adjustment item to the desired setting.
5 To exit from the GUI, press MENU.
Sync" menu screen and press ENTER.
MOUSE
ADJ.
mark of the selected
E-46