Using As A Laser Pointer; Using As A Wired Remote Control - Sharp XG-V10XU Operation Manual

Using as a Laser Pointer

Use as a Laser Pointer
Slide the MOUSE/ADJUSTMENT switch to MOUSE, and press LASER POINTER ( ) to activate
the laser pointer.
1.2.3 4.5.6
Conference Series
• When the button is released, the light automatically goes off.
• For safety reasons, the laser pointer automatically goes off after 1 minute of continuous use. To turn it on, release LASER
POINTER ( ) and press again.
CAUTION
• Do not look into the laser pointer window or shine the laser beam on yourself or others. (The laser beam used in this
product is harmless when directed onto the skin. However, be careful not to project the beam directly into the eyes.)

Using as a Wired Remote Control

E-39
LASER
POINTER
MOUSE/ADJUSTMENT
MOUSE ADJ.
switch
3.5 mm stereo minijack cable
(sold separately)
Wired Remote Control
When the remote control cannot be used due to the range
or positioning of the projector (rear projection, etc.), connect
a 3.5 mm stereo minijack cable (sold separately) from the
wired remote control input on the bottom of the remote
control to the WIRED REMOTE control input terminal on the
side of the projector.
• The laser pointer and wireless mouse functions can still be
operated with the wired remote control.