List Of Key Operator Programs - Sharp AR-M208 Key Operator's Manual

LIST OF KEY OPERATOR
PROGRAMS
A complete list of all key operator programs is provided below. These programs can only be accessed
by first entering the key operator code number.
Category Program Name
Function setting Key Operator Number
Change
Exposure Adjust
Margin Default
Erase Adjust
Stream Feeding
Rotation Copy
Output Trays
Offset Function
Memory for Printer
Toner Save Mode
Timer setting Auto Power Off
Auto Clear
Preheat Mode
Time Out Setting
Function
Changes the key operator code number.
Lightens or darkens copies in the automatic
exposure mode.
Sets the initial margin shift values.
Sets the initial amount of the erase area.
Enables the stream feeding mode for copying
from a RSPF.
Enables/disables rotation of original images.
Sets the output trays for the copy and printer
modes. (This program can be used only if an
optional finisher or job separator tray kit is
installed.)
Enables/disables the offset function in the output
tray.
Sets the memory assignment used for printer
feature.
Reduces toner consumption.
Sets a time interval after which the copier enters
the auto power shut-off mode.
Sets a time interval after which the copier returns
to the initial settings.
Sets the time that elapses before the copier
enters the preheat mode after copying is
completed.
Sets the time after which a print or fax job
resumes. (This program can be used only if an
optional facsimile expansion kit is installed.)
Page
No.
9
9
9
10
10
10
11
11
12
12
13
13
14
14
5