Checking The Toner Level; Routine Maintenance; Cleaning The Document Glass And Spf/Rspf/Document Cover - Sharp AR-M160 Operation Manual

ROUTINE MAINTENANCE

CHECKING THE TONER LEVEL

The toner level is indicated by a 6-level display. Use it as a guideline for replacing the toner cartridge.
1
Hold down the [Light] key (
the alarm indicators ( ,
blink.
1 3 5
ROUTINE MAINTENANCE
CLEANING THE DOCUMENT GLASS AND
SPF/RSPF/DOCUMENT COVER
If the document glass, SPF/RSPF, underside of the document cover, or the scanner for originals coming from the
SPF/RSPF (the long narrow glass surface on the right side of the document glass) become dirty, the dirt may appear
on copies. Always keep these parts clean.
Stains or dirt on the document glass/SPF/RSPF will also be copied. Wipe the document glass, document cover
portion of the SPF/RSPF and the scanning window on the document glass with a soft, clean cloth.
If necessary, dampen the cloth with water. Do not use thinner, benzene, or similar volatile cleaning agents.
Do not spray flammable cleaner gas.
Warning
72
) until
, , , )
The display will show
"- -".
2
Hold down the [Copy ratio display] key
( ) for more than 5 seconds.
ZOOM
3
Press the [Light] key (
the normal display.
The alarm indicators (
The display returns to the number of copies
display.
The approximate quantity
of toner remaining will be
indicated in the display
as a percentage. ("100",
"75", "50", "25", "10" is
displayed.) When the
percentage is less than
10%, "LO" will be
displayed.
) to return to
, , , , ) go off.