Loading Paper; Paper; Special Papers - Sharp AR-M160 Operation Manual

LOADING PAPER

The paper required indicator (
when the selected paper tray is not installed or is improperly installed.

PAPER

For best results, use only SHARP recommended paper.
Paper tray type Paper type
Paper tray Standard paper
250-sheet paper Recycled paper
feed unit
2x250-sheet paper
feed unit
Bypass tray Standard paper
Recycled paper
Thick paper
Transparency film
Labels
Envelopes
1
* 5-1/2" x 8-1/2" can be used in the upper paper tray but cannot be used in other trays (including trays in optional paper feeding
unit).
2
* The number of sheets of the paper which can be set changes with the weight of a paper.

Special papers

Follow these guidelines when using special papers.
● Use SHARP recommended transparency film and label sheets. Using other than SHARP recommended
paper may result in misfeeds or smudges on the output. If other than SHARP recommended media must
be used, feed each sheet one at a time using the bypass tray (do not attempt continuous copying or
printing).
● There are many varieties of special paper available on the market, and some cannot be used with this
machine. Before using special paper, contact a SHARP service center.
● Before using other than SHARP recommended paper, make a test copy to see if the paper is suitable.
) will light up when there is no copy paper in the selected paper feed station, or
Size
1
5-1/2" x 8-1/2" * (Invoice)
8-1/2" x 11" (Letter)
8-1/2" x 14" (Legal)
11" x 17" (Ledger)
5-1/2" x 8-1/2" (Invoice)
8-1/2" x 11" (Letter)
8-1/2" x 14" (Legal)
11" x 17" (Ledger)
Commercial 9
(3-7/8" x 8-7/8")
Commercial 10
(4-1/8" x 9-1/2")
International DL
(110 mm x 220 mm)
International C5
(162 mm x 229 mm)
Weight
15 lbs. to 24 lbs. 250 sheets
2 2
(56 g/m to 90 g/m ) (Load paper lower
than the line on the
tray)
15 lbs. to 20 lbs. 100 sheets *
2 2
(56 g/m to 80 g/m )
2
Max. 54 lbs. (200 g/m ) Load one sheet of
these papers at a
time to the bypass
tray.
5 sheets
Capacity
1
2
13