Scanner Function - Sharp AR-M160 Operation Manual

Scanner Function

Type
Scanning method
Light source
Resolution*
Original types
Effective scanning area
Scanning speed
Input Data
Output Data
Scanning colors
Protocol
Interface port
Drop out color
Supported operating
systems
Void area
Interface cables
* The resolution may be enhanced by the scanner driver depending on the scanned area and amount of memory installed in the
machine.
As a part of our policy of continuous improvement, SHARP reserves the right to make design and specification
Note
changes for product improvement without prior notice. The performance specification figures indicated are
nominal values of production units. There may be some deviations from these values in individual units.
Flatbed scanner
Document glass / SPF/RSPF
Cold cathode fluorescent lamp
Basic: 600 dpi x 600 dpi
Setting range: 50dpi - 9600dpi
Sheet media, books
11-45/64" (297 mm) (Lengthwise) x 16-63/64" (431 mm) (Width)
2.88 msec/line
1 bit or 12 bit
1 bit or 8 bit
Black and white 2 value, Grayscale, Full color
TWAIN / WIA (Windows XP only) / STI
USB port (USB 1.1)
USB port (USB 2.0, dual function board must be installed)
Yes
Windows98/Me
Windows 2000 Professional/Windows XP Home Edition/Professional
(Detailed information can be found in the Software Setup Guide)
Top and bottom edges 7/64" (2.5 mm) due to scanner driver
Right and left edges 1/8" (3.0 mm)
[USB cable (only for connection to USB 1.1 port)]
Shielded twisted pair cable (max. length 10 feet (3 m))
[USB cable (only for connection to USB 2.0 port)]
Shielded twisted pair cable (max. length 10 feet (3 m), must support USB 2.0)
Please purchase a commercially available USB cable.
APPENDIX
9
79