Loading Paper; Changing A Tray's Paper Size; Setting; Loading The Paper Tray - Sharp AR-M160 Operation Manual

BEFORE USING THE MACHINE

LOADING PAPER

Make sure that the machine is not copying or printing, and then follow these steps to load paper.

Loading the paper tray

1
Gently lift and pull out the paper tray
until it stops.
2
Push the pressure plate down until it
locks in place.
3
Fan the paper.
4
Load paper into the tray.
• Do not load paper higher than the line on
Note
the tray (up to 250 sheets).
• Make sure that the paper fits under the tab
on the right side of the tray.
• Make sure the stack of paper is straight
before loading it. When adding paper, take
the remaining paper out and combine it into
a single stack with the new paper.
14
Push the center of the
pressure plate down until
it locks into place.
If the paper is not fanned,
double-feeds or misfeeds
may occur.
5
Gently push the paper tray into the
machine.
If you loaded a different size of paper than
Note
was loaded previously in the tray, go to

"CHANGING A TRAY'S PAPER SIZE

SETTING" (p.16).