Fan Mode; Ventilation Mode - Sharp CV -P09FX Installation And Operation Manual

FAN MODE

In this mode, the air conditioner simply circulates the air without cooling it.
Install the exhaust hose (See Page16), turn the drainage nozzle to the CLOSE
position, and check the drainage nozzle is covered with the stopcock.

VENTILATION MODE

In this mode, the air conditioner ventilates the air to outdoors.
Install the exhaust hose (See Page 16), turn the drainage nozzle to the CLOSE
position, and check the drainage nozzle is covered with the stopcock.
1
Press the MODE button to select FAN mode.
COOL
2
2
Press the POWER button to start operation.
• The red OPERATION lamp on the unit will light.
5 2
• The temperature cannot be set.
3
3
Press the FAN button to set the desired fan
speed.
1
QUIET
3
1
TO TURN OFF
Press the POWER button again.
• The red OPERATION lamp on the unit will turn off.
1
Press the MODE button to select VENT mode.
COOL
2
2
Press the POWER button to start operation.
2
• The red OPERATION lamp on the unit will light.
• The temperature cannot be set.
5
3
Press the FAN button to set the desired fan
3
speed.
1
• Although the louvers are closed and no air blows
out into the room, the external ventilation fan speed
3
changes.
1 QUIET
4
TO TURN OFF
Press the POWER button again.
• The red OPERATION lamp on the unit will turn off.
E-22
DEHUM FAN VENT
LOW HIGH
DEHUM FAN VENT
LOW HIGH